Features, Specs & Directions

Features

 

  • BooBuddy is a cute, stuffed bear trigger object
  • Detects EMF and responds with lights in the arms when spikes arise
  • All electronics are completely hidden from view within the doll

 

Specs

 

  • Size: ~7" tall (when sitting)
  • Battery: one 9v (not included)
  • EMF meter within the bear lights up the arms when spikes arise.
  • Lights are in both arms. One arm lit signifies low/medium frequencies while two arms indicates a higher strength.
  • Light in the belly indicates the EMF detection is ON
  • BooBuddy wears a backpack that holds the battery compartment with on/off switch

 

Quick Start

  • Find a stable place to sit BooBuddy down
  • Turn BooBuddy on using the switch located on the battery pack in the backpack. BE CAREFUL! See directions below.
  • BooBuddy will immediately begin detecting energy changes.

 

Directions

  • To turn ON/OFF open the backpack using the zipper. Inside you will find the battery compartment. Pull back the backpack flap so you can see the battery compartment easily. DO NOT pull the battery compartment out as this may harm the electronics. You will see a small on/off switch. Slide that switch to the designed position. The light in the belly of the doll will light to indicate the EMF detection is on.
  • To change the battery open the backpack using the zipper. Inside you will find the battery compartment. Pull back the backpack flap so you can see the battery compartment easily. DO NOT pull the battery compartment out as this may harm the electronics. Slide back the battery cover and place in a new 9-volt battery in making sure the match up the posative and negative contacts.

 

Care

  • BooBuddy is not a toy. It is a sophisticated tool with sensitive electronics.
  • For proper care, treat BooBuddy as you would any electronic instrument.
  • Do not machine wash or expose to harsh environments.

More info and purchase

Buy Now

Features

 

  • BooBuddy is an attractive, talking bear trigger object
  • Detects EMF energy and responds with lights in the paws
  • Detects motion, temperature and responds with a friendly voice
  • Baseline readings start when you turn the unit on (first 30 seconds)
  • Asks EVP questions on it's own when the environment is quiet
  • All electronics are hidden completely in the bear out of view
  • Built, specifically, for Ghost Hunting by GhostStop

 

Specs

 

  • Size: ~10" tall (sitting)
  • Battery: two AA batteries (not included)
  • EMF detection lights up the arms when spikes arise in both arms: one arm signifies low/medium EMF change; two arms indicates a higher strength.
  • Light in the belly indicates BooBuddy is ON
  • BooBuddy's backpack that holds the battery compartment with on/off switch
  • BooBuddy speaks a series of EVP questions with a pause in between to allow for potential EVP responses without too much interuption.
  • Where no environmental changes have been detected, BooBuddy will ask an EVP question to promote response
  • BooBuddy speaks to indicate Motion and Temperature changes
  • BooBuddy performs baseline readings when you turn it on. Set BooBuddy downlet it sit for 30 seconds. This initializing period is when BooBuddy is detecting the baseline readings for comparison later. For best results do not touch BooBuddy until the introduction, "Hi. I'm BooBuddy. What's your name?" After that intro, BooBuddy will be begin detecting changes.
  • Generally, BooBuddy is not meant to be a measurement device but rather usher for potential interaction. But if you're interested in specs, here are a few:
  • EMF threshold for change: TBD (still tweaking)
  • Temp threshold for change: ~2 degrees
  • Motion threshold for change: TBD (still tweaking)
  • Estimated to run for over 20 hours on one set of batteries (based on current test of prototype but final product may vary)

 

Quick Start

  • Find a stable place to sit BooBuddy down
  • Turn BooBuddy on using the switch located on the battery pack in the backpack. BE CAREFUL! See directions below.
  • Set BooBuddy down. BooBuddy will begin baseline readings for 30 seconds. Paws will blink during baseline process.
  • BooBuddy will ask questions and respond to environmental changes every 40 seconds.

 

Directions

  • To turn ON/OFF open the backpack using the zipper. Inside you will find the battery compartment. Pull back the backpack flap so you can see the battery compartment easily. DO NOT pull the battery compartment out as this may harm the electronics. You will see a small on/off switch. Slide that switch to the desired position. A light in the belly will illuminate and you will hear a BEEP to indicate BooBuddy is ON.
  • To change the battery open the backpack using the zipper. Inside you will find the battery compartment. Pull back the backpack flap so you can see the battery compartment easily. DO NOT pull the battery compartment out as this may harm the electronics. Slide back the battery cover and insert new batteries making sure to match up the positive and negative contacts.
  • The first 30 seconds BooBuddy will conduct baseline environmental readings for electromagnetic energy (EMF), temperature, vibration and its own physical orientation. The paws will blink during this baseline process. For best results, find a suitable, stable location to set the bear down on in order to maintain a stable base throughout the session.
  • The paws will light up when EMF changes are detected. One paw lit indicates a lower spike while both paws lit indicates a stronger spike in energy.
  • BooBuddy will respond verbally to changes in motion, temp and physical orientation. Listen for related responses.
  • After each time BooBuddy speaks it will ALWAYS wait 40 seconds to allow for potential EVPs to be recorded and allow for proper time to do so.
  • If no environmental changes are encountered after 40 seconds, BooBuddy will ask a question to promote a positive response.

Care

  • BooBuddy is not a toy. It is a sophisticated tool with sensitive electronics.
  • For proper care, treat BooBuddy as you would any electronic instrument.
  • Do not machine wash or expose to harsh environments.

 

More info and purchase

 

patent pending

Buy Now

a product of the brains at

All content copyright © 2015 GhostStop, LLC. GhostStop®, BooBuddyTM and logos are registered trademarks of GhostStop, LLC. All rights reserved.